Rear Lid Closing Assist Motor -V382-, EMOVING And Installing: Removing

-- Remove the rear lid lower trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .

-- Disengage the support bracket -7- by releasing the catches -A arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disengage the release cable nipple -6- from the release lever -5-.

-- Disconnect the connector -3-.

-- Release the catches -2, 4 and 8- by turning them 90° clockwise -arrow B-.

-- Remove the Rear Lid Closing Assist Motor -V382- -item 1-.