LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A4 Prestige >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids >> 55 Hood, Lids >> Rear Lid >> Hinges, Removing And Installing >> Hinges, Removing And Installing, A4 AVANT >> Removing

Hinges, Removing And Installing, A4 AVANT: Removing

-- Remove The Rear Lid Upper Trim Panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .

-- Remove The Headliner. Refer to HEADLINER, REMOVING AND INSTALLING .

-- If equipped, remove the rear lid motor. Refer to REAR LID MOTOR 1 AND 2 -V444- / -V445-, EMOVING AND INSTALLING, A4 AVANT .

-- Push the expanding pin -4- through.

GWWA55-11295Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release the retainers -1 and 5- and remove the wiring harness bracket -3- from the mount on the hinge -2-.

-- Free up the wiring harness.

-- Remove the left and right gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .

-- Close the rear lid.

-- Remove the bolts -1 and 2- and nut -4-.

GWWA55-11208Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the hinge -3-.