LEMON Manuals: Even more car manuals for everyone

Home >> Audi >> 2017 >> A4 Prestige >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids >> 55 Hood, Lids >> Rear Lid >> Gas-Filled Strut, Removing And Installing >> Installing

Gas-Filled Strut, Removing And Installing: Installing

Install in reverse order of removal and Note The Following:

-- Press the gas-filled strut onto the ball stud until it engages audibly.

scientia non olet · About LEMON Manuals