Hook Release Lever, Removing And Installing: Removing

VERSION 1: 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

TIP:

Version 1 has a cut-out for placing the screwdriver.

-- Pull the clip -2- out of the release lever -1- slightly -arrow A- using a small screwdriver.

-- Remove the release lever upward -arrow B-.

VERSION 2: 

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

TIP:

Version 2 Does Not Have A Cut-Out For Placing The Screwdriver. 

-- Push the clamp -2- inward -arrow A- and at the same time remove the operating lever -1- upward -arrow B-.