LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A4 Prestige >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Hood, Lids >> 55 Hood, Lids >> Hood >> Hinges, Removing And Installing >> Removing

Hinges, Removing And Installing: Removing

-- Vehicles with pedestrian protection: disconnect the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Remove the hood. Refer to HOOD, REMOVING AND INSTALLING .

-- If Required, Remove The Washer Fluid Reservoir. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

-- Vehicles With Pedestrian Protection: Remove The Pedestrian Protection Trigger. Refer to OVERVIEW - PEDESTRIAN PROTECTION / PEDESTRIAN PROTECTION CENTER CRASH SENSOR -G693-, REMOVING AND INSTALLING .

-- Remove the gas-filled strut. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .

-- Bring the hinge into the "closed" position.

-- Mark the hinge installation position for reinstallation.

-- Remove the bolts -arrows-.

GWWA55-11253Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the hinge -1-.