LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A4 Prestige >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers >> 63 Bumpers >> Rear Bumper >> Overview - Impact Member >> Overview - Impact Member A4 And A5 >> Impact Member - Tightening Specification And Sequence

Impact Member - Tightening Specification And Sequence

Fig 1: Impact Member - Tightening Specification and Sequence
GWWA63-11214Courtesy of AUDI OF AMERICA, LLC

-- Tighten The Bolts And Nuts Gradually In The Sequence Shown. 

Step Bolts/Nuts Tightening Specification/Additional Turn
1. -1- 55 Nm 
2. -2 through 7- 50 Nm 
3. -2 through 7- 45°
scientia non olet · About LEMON Manuals