Bumper Cover, Removing And Installing: Removing: Notes

-- Push in the front wheels and loosen the wheel housing liner near the front bumper cover. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

A4: 

Courtesy of AUDI OF AMERICA, LLC

-- Use the :T40172C  with the :T40172/1  to remove the expanding rivet -arrow-.

-- Remove the bolt -1-.

A5: 

Courtesy of AUDI OF AMERICA, LLC

-- Remove the expanding rivet -arrow-.

-- Remove the bolt -1-.

Continuation: 

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- If equipped, free up the antenna wires -1- and disconnect the connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the bolts -1 and 2-.

Courtesy of AUDI OF AMERICA, LLC