Component Location Overview - Relay Panel, Instrument Panel, E-Boxes Engine Compartment

Fig 1: Memory Seat/Steering Column Adjustment Control Module Connector End View (J136, T12x, T32m, T16q)

Courtesy of AUDI OF AMERICA, LLC

1. Bracket
   • For the control modules
2. Automatic Glow Time Control Module -J179-
3. Bolt
   • 2.5 Nm 
4. Line
   • Allocation. Refer to the appropriate Wiring Diagram(s).
   • Tightening specification: 7.5 Nm 
5. Line
   • Allocation. Refer to the appropriate Wiring Diagram(s).
   • Tightening specification:7.5 Nm 
6. Line
   • Allocation. Refer to the appropriate Wiring Diagram(s).
   • Tightening specification:7.5 Nm 
7. Line
   • Allocation. Refer to the appropriate Wiring Diagram(s).
   • Tightening specification: 7.5 Nm 
8. Terminal 30 Wire Junction 2 -TV22-
   • Removing and Installing. Refer to TERMINAL 30 WIRE JUNCTION 2 -TV22- .
9. Nut
   • 7.5 Nm 
10. Bolt
    • 3 Nm 
    • Quantity: 2
11. Nut
    • 18 Nm 
12. Positive Cable
    • From the battery
13. Terminal 30 Wire Junction -TV2-
    • Removing and Installing. Refer to TERMINAL 30 WIRE JUNCTION -TV2-, REMOVING AND INSTALLING .
14. Suppressor -C24-
    • Removing and Installing. Refer to SUPPRESSOR -C24-, REMOVING AND INSTALLING .
15. Cap
16. Positive Cable
    • To starter, generator
17. Nut
    • 20 Nm 
18. Relay and Fuse Panel 3 -SR3-
    • Allocation. Refer to the appropriate Wiring Diagram(s).
19. Nut
    • 2.5 Nm 
    • Quantity: 2