Tires, Changing, Vehicles With Tire Pressure Monitoring System: Dismounting
The metal valve and the tire pressure sensor can be used again.
-- Release the tire air by unscrewing the nickel-plated valve insert.
-- Roll or press the tire off.
-- When using pressure paddles, first separate tires from side opposite of valve.
NOTE:
Do not use a bead breaker in the shaded area -a-.
-- Position the mounting head near the valves so the tire iron can be positioned approximately 30° -b- next to the valve.
-- Then remove tire in valve area first.
-- Visually inspect for any loosened or damaged parts.
NOTE:
If there are any loosened threaded connections, replace the entire valve unit.
Replace a damaged tire pressure monitoring sensor.