Overview - Rear Wheel Housing Liner

Courtesy of AUDI OF AMERICA, LLC

1. Expanding Rivet
   • Quantity: 3
2. Cover
   • Removing and Installing. Refer to COVER, REMOVING AND INSTALLING .
3. Rear Wheel Spoiler
   • To remove, loosen the rear wheel housing liner at the front and press it to the side. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
4. Bolt
   • 2 Nm
   • Quantity: 2
5. Rear Wheel Housing Liner
   • Removing and Installing. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
6. Clip
   • Quantity: 3
7. Bolt
   • Quantity: 3
   • Tightening sequence. Refer to Fig 1.
8. Bolt
   • 2 Nm
   • Quantity: 3

Fig 1: Wheel Housing Liner - Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts to 2 Nm in the sequence -1 to 3-.