Tunnel Brace, Removing And Installing

Removing the Front Tunnel Bridge

Courtesy of AUDI OF AMERICA, LLC

-- Vehicles with TDI engines: free up the wiring harness -1- -arrows-.

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front tunnel brace -1-.

Removing the Rear Tunnel Brace

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- and push the underbody panel -1- slightly downward.

-- Remove the nuts -1 and 3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear tunnel brace -2-.

Installing

Install in reverse order of removal.

Tightening Specifications

• Refer to OVERVIEW - NOISE INSULATION 
• Refer to OVERVIEW - UNDERBODY TRIM PANELS .