Diagonal Braces, Removing And Installing

• The following components must be replaced after removal. Refer to OVERVIEW - UNDERBODY BRACING .

Removing the Front Diagonal Braces

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation. Refer to FRONT NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the center underbody panel. Refer to UNDERBODY TRIM PANELS, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and then remove the diagonal brace -1-.

Removing the Rear Diagonal Braces

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the center underbody trim panel in the rear area and lower slightly. Refer to OVERVIEW - UNDERBODY TRIM PANELS  .

-- Remove the bolts -1 through 4- and the diagonal brace.

Installing

Install in reverse order of removal and note the following:

When tightening the bolts, the vehicle must stand on its wheels.

Tightening Specifications

• Refer to OVERVIEW - UNDERBODY BRACING .