Overview - Knee Airbag

Fig 1: Exploded View Of Knee Airbag

Courtesy of AUDI OF AMERICA, LLC

Driver Knee Airbag Igniter -N295-
- Removing and installing, refer to KNEE AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
  CAUTION:
  There is a risk of causing damage to the surface of the knee airbag due to mechanical stress.
  - After finishing work perform a visual inspection if the surface of the knee airbag especially along the area of the perforation is undamaged.
Bolting Point
- For knee airbag
  CAUTION:
  There is a risk of malfunctions do to a faulty Ground (GND) connection.
  - The counter threaded and contact surface must be free of paint, coating, and corrosion, the threaded connection serves as the GND connection for the knee airbag.
Bolt
- 8 Nm
- Quantity: 3
- Replace after removing
Connector
- for the Driver Knee Airbag Igniter -N295-