Airbag Connector, Replacing: Removing
Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
-- Remove the driver side airbag, refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
Vehicles with 3-Spoke Steering Wheel
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Disconnect the connectors -1, 2, 4 and 6- by releasing the tabs.
-- Disconnect the connector -3- from the adapter and -5- for the Driver Airbag Igniter -N95-.
-- Open the connector lock -2- with a small screwdriver -arrow- and disconnect the connector -1-.
-- Unhook and remove the wiring harness from the bracket.
Versions with 4-Spoke Steering Wheel
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Disconnect the connectors -1, 2, 4 and 6- by releasing the tabs.
-- Disconnect the connector -3- from the adapter and -5- for the Driver Airbag Igniter -N95-.
-- Open the connector lock -2- with a small screwdriver -arrow- and disconnect the connector -1-.
-- Unhook and remove the wiring harness from the bracket.