Refrigerant Oil Capacities In Refrigerant Circuits For Refrigerant R1234YF
The capacities for the Audi A3 (8V_ or 85_ for china) apply to all versions (Sedan, Sportback, Cabriolet, etc.)
Depending on the time period of production and the engine, the compressor construction type may vary.
Depending on the A/C compressor type, different refrigerant oil capacities may be designated for the refrigerant circuit.
There are different refrigerant oils used for the "Denso" -, "Delphi/Mahle" -, "Visteon" and "Sanden" A/C compressors. Refer to APPROVED REFRIGERANT OILS FOR REFRIGERANT R1234YF .
For additional information about refrigerant oil. Refer to APPROVED REFRIGERANT OILS FOR REFRIGERANT R1234yf / REFRIGERANT AND REFRIGERANT OIL .
- Refer to APPROVED REFRIGERANT OILS FOR REFRIGERANT R1234YF
- Overview and characteristics for the refrigerant circuit. Refer to SYSTEM OVERVIEW - REFRIGERANT CIRCUIT
| Vehicle Model | Production Period | Total Quantity of Oil in Refrigerant Circuit in Cm3 | Quantity of Refrigerant Oil in Replacement Compressor in Cm3 | Differing Features of This Refrigerant Circuit |
|---|---|---|---|---|
| Audi Q2 Audi A3 | From 06/2016 | 110 + / - 10 | 110 + / - 10 |
|
| 75+ / - 10 | 75 + / - 10 |
|
||
| 110 + / - 10 | 110 + / - 10 |
|
||
| Audi A3 e-tron | From 06/2016 | 120 + / - 10 | 120 + / - 10 |
|
Audi RS 3
|
From 06/2016 | 110 + / - 10 | 110 + / - 10 |
|
The replacement compressor contains the full quantity of oil intended for the refrigerant circuit. If the A/C compressor is replaced, the amount of oil in the A/C compressor must then be adjusted. Refer to APPROVED REFRIGERANT OILS FOR REFRIGERANT R1234yf / TECHNICAL DATA (R1234yf SERVICING) / COMPONENTS, REPLACING (R1234yf) .
Different A/C compressors are installed depending on the vehicle date of manufacture and the engine.
These A/C compressors are available as replacement parts with different oil fill capacities, therefore note capacity on the A/C compressor and the exact part number.
The reason for the different oil capacities inside the A/C compressor is due to the design of the A/C compressor (with or with an oil separator on the high pressure connection) or to the design of the refrigerant circuit if the A/C compressors are have the identical design. Pay attention to the different capacities. Too much oil in the circuit leads to higher pressures and reduces cooling output of the system. Too little oil may lead to lubrication problems in the compressor.
A data plate may be attached to the A/C compressor by the manufacturer, indicating the part number and refrigerant oil quantity.