A/C Compressor -G111-

WARNING: This page is about a different variant/trim than selected.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Switch Pressures, Removing And Installing Switches As Well As Switch Arrangement And Version. Refer To Vehicle Specific Refrigerant Circuit REFRIGERANT CIRCUIT / REFRIGERANT CIRCUIT (R1234yf) (vehicle-specific repair information).

Inductive Sensor

The sensor pulses (4 per compressor revolution) and the engine speed enable the Front A/C Display Control Head -E87- or the Climatronic Control Module -J255- to calculate belt slip.

If the belt slip exceeds a specified value, the compressor is switched off by the control module via the A/C clutch.

NOTE:

Installed in Audi vehicles with an A/C compressor driven the a ribbed belt and with Zexel compressor. Refer to REFRIGERANT CIRCUIT / REFRIGERANT CIRCUIT (R1234yf) (vehicle-specific repair information).

Beginning from production year 2006, the name of the "Zexel" A/C compressor was changed from "Zexel" to "Valeo".