Heater And A/C Unit, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install In Reverse Order Of Removal. Note The Following:

-- Fill The Coolant. Refer to COOLANT, DRAINING AND FILLING [CNSB, CNTC, CYFB] (DI - 1.8L/2.0L) / COOLANT, DRAINING AND FILLING WITHOUT COOLING SYSTEM CHARGE KIT - ELECTRIC VACUUM PUMP:VAS6096/2 (TDI - 1.6L/2.0L) or COOLANT, DRAINING AND FILLING [CNSB, CNTC] .

-- Vehicles With A/C: Evacuate The Refrigerant Circuit And Fill It. Refer to REFRIGERANT CIRCUIT, DISCHARGING WITH A/C SERVICE STATION (R134a) / REFRIGERANT CIRCUIT, EVACUATING WITH A/C SERVICE STATION (R134a) / REFRIGERANT CIRCUIT, CHARGING WITH A/C SERVICE STATION (R134a) (Refrigerant R134a Servicing, Refrigerant Circuit, Working with A/C Service Station) or REFRIGERANT CIRCUIT, DISCHARGING (R1234YF) / REFRIGERANT CIRCUIT, EVACUATING (R1234YF) / REFRIGERANT CIRCUIT, CHARGING (R1234YF) .

-- Vehicles with A/C: Operate the A/C system after filling the refrigerant circuit. Refer to A/C SYSTEM, STARTING OPERATION AFTER FILLING REFRIGERANT CIRCUIT .

-- Check the DTC memory and erase any displayed entries using the :Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

-- Check the heater and A/C unit function.