Coolant Change-Over Valve 2 -N633-, Removing And Installing
WARNING: This page is about a different variant/trim than selected.
NOTE:
The Coolant Change-Over Valve 2 -N633- is installed in the engine coolant circuit. Refer to COOLANT PUMP/COOLANT THERMOSTAT [CNSB, CNTC] / COOLANT PUMP/THERMOSTAT [CRUA, DEJA] (connection diagram for the coolant hoses) and refer to the appropriate Wiring Diagram(s).
To remove and install. Refer to COOLANT VALVES, REMOVING AND INSTALLING (N82 & N488) [CNSB, CNTC] / COOLANT VALVES, REMOVING AND INSTALLING [CNSB, CNTC] / COOLANT PUMP/THERMOSTAT [CRUA, DEJA] (Connection Diagram for Coolant Hoses or Coolant Pump/Thermostat).