Fresh Air/Recirculating Air/Back Pressure Door Motor Adjuster, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the fresh air/recirculating air/back pressure door motor. Refer to FRESH AIR/RECIRCULATING AIR/BACK PRESSURE DOOR MOTOR -V425- WITH FRESH AIR/RECIRCULATING AIR/BACK PRESSURE DOOR MOTOR POSITION SENSOR -G644-, REMOVING AND INSTALLING .
-- Free up the wiring harness -5-.
-- Carefully remove the operating lever -1- from the lever for the fresh air/recirculating air door -8- in direction of -arrow-.
-- Remove the bolts -4 and 7-.
-- Remove the adjuster -6-.