Heater And Manually Regulated A/C System: Installing

WARNING: This page is about a different variant/trim than selected.

Install In Reverse Order Of Removal. Note The Following:

NOTE:

Check the function of the doors and linkage before installing.

Check if the lever and shafts are seated correctly in the mounts.

-- Check if the gears correlate correctly with one another.

The square tooth -2- must engage into the gap -3- on the toothed gear -1-.

Courtesy of AUDI OF AMERICA, LLC

-- When mounting the adjuster, the operating lever -5- must engage into the vent door lever -6- in the middle.

Courtesy of AUDI OF AMERICA, LLC