LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (Passenger Protection, Airbags, Seat Belts -- (Sedan)) >> 69 Passenger Protection, Airbags, Seat Belts >> Pedestrian Protection >> Driver And Front Passenger Side Pedestrian Protection Crash Sensor 2 -G851- And -G852-, Removing And Installing >> Pedestrian Protection Crash Sensor Bracket, Removing And Installing >> Removing

Pedestrian Protection Crash Sensor Bracket, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.
GWWA69-10991Courtesy of AUDI OF AMERICA, LLC

-- Remove the Driver Side Pedestrian Protection Crash Sensor 2 -G851- / Front Passenger Side Pedestrian Protection Crash Sensor 2 -G852-. Refer to DRIVER AND FRONT PASSENGER SIDE PEDESTRIAN PROTECTION CRASH SENSOR 2 -G851- AND -G852-, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2016 .

WARNING:

Risk of eye injury.

  • Wear protective eyewear!

-- Drill out the rivets -1- and remove the pedestrian protection crash sensor 2 bracket -2-