Front Passenger Airbag Deactivation Key Switch, Removing And Installing: Removing
Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
-- Disconnect the battery ground cable with the ignition turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Press the catch -1- in the direction of the -arrow- until the connector disengages.
-- Disconnect the connector -2-.
-- Release the springs -3- and -5- and push the Front Passenger Airbag Deactivation Key Switch -E224- -item 4- out of the key switch housing.