Steering Wheel, Removing And Installing: Installing

Installation is reverse of removal, noting the following:

Before positioning steering wheel, make sure wheels are in straight position.

-- When installing a removed steering wheel, ensure that the markings on the steering column/steering wheel are aligned.

-- When installing a new steering wheel (without a marking): mount the steering wheel in its center position (the steering wheel spokes must be horizontal and the wheels must be in the straight-ahead position).

-- Install the airbag unit. Refer to DRIVER SIDE AIRBAG .

-- Perform road test.

-- If steering wheel is crooked, remove it again and rotate it on steering column splines.