Seat Pan Frame, Replacing, Manual Front Seat: Removing
- Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
Move the front seat to the highest possible position. This reduces the spring force when removing and installing the seat height adjuster.
-- Move the front seat all the way forward and raise it as high as possible. Then lower it one stroke.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the front backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
-- Remove the seat pan cover and cushion. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING .
Remove the wiring and components and install in the new seat pan.
-- If equipped: remove the bolt -1- and unclip the seat position sensor -2- from the seat pan lower frame -3- and release -arrow-.
-- Remove the front seat belt latch. Refer to FRONT SEAT BELT LATCH, REMOVING AND INSTALLING .
-- Remove the seat height adjuster. Refer to SEAT HEIGHT ADJUSTER, REMOVING AND INSTALLING .
-- Equipment level with storage compartment: remove the storage compartment. Refer to STORAGE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the seat angle adjustment, sport seats/super-sport seat. Refer to SEAT ANGLE ADJUSTER, REMOVING AND INSTALLING .
-- Seat depth adjuster, sport seat/super-sport seat. Refer to SEAT DEPTH ADJUSTER, REMOVING AND INSTALLING .
-- Remove the wiring harness and individual wires from the seat pan.