Driver/Front Passenger Seat Adjustment Control Head -E470- / -E471-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Carefully pry out the seat adjustment actuator -1- from the retainers using the :3409 .
-- Repeat the procedure on the backrest adjustment actuator.
-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING, POWER FRONT SEAT .
-- Remove the bolts -3 to 5-.
-- Remove the control head -1- from the side sill seat side trim -2-.