Overview - Seat Pan, Seat Height Adjustment Motor

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Seat Pan Seat Height Adjustment Motor

Courtesy of AUDI OF AMERICA, LLC

Seat Pan
Bolt
- 18 Nm
  CAUTION:
  The bolt has a left-hand thread.
- Self-locking
- Replace after removing.
- Clean the threaded hole for the bolt with a thread tap, for example
Driver Seat Height Adjustment Motor -V245-
- Front passenger side: Front Passenger Seat Height Adjustment Motor -V246-
- Removing and Installing. Refer to DRIVER/FRONT PASSENGER SEAT HEIGHT ADJUSTMENT MOTOR -V245- / -V246-, REMOVING AND INSTALLING .
Bolt
- 10 Nm
- Quantity: 2
- Self-locking
- Replace after removing.
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
Bracket
- Bolted to the seat pan
Bolt
- Self-locking
- Replace after removing.
- Clean the threaded hole for the bolt with a thread tap, for example
- Tightening specification OVERVIEW - SEAT PAN, SEAT ANGLE ADJUSTMENT MOTOR
Bolt
- 28 Nm
- Quantity: 2
- Self-locking
- Replace after removing.
- Threaded holes for the bolts must be cleaned, for example, with a thread tap