Lumbar Support Adjustment Motors -V125- / -V126- / -V129- / -V130-, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

-- Attach the upper lumbar support -1- in the backrest frame -2- -arrows- and move it down and to the rear.

-- Rivet the lumbar support to the backrest frame.

WARNING:

Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
Follow all the instructions when installing the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .

Further Installation Is The Reverse Order Of Removal.