Backrest Cover, Removing And Installing, Standard/Sport Seat: Installing
WARNING: This page is about a different variant/trim than selected.
-- Install backrest cover with catches at the bottom of the backrest frame.
-- Pivot the backrest cover upward, and lock the side retaining tabs and the upper retaining tab.
-- Make sure the tabs on the side fit correctly into the backrest frame and the lower hooks are bent correctly over the backrest frame.
-- Push the backrest cover forcefully on the backrest, until the catches engage audibly.
-- Check if the backrest cover is correctly latched.
- The backrest cover cannot be removed at the side or in the upper area anymore.
Further Installation Is The Reverse Order Of Removal.