Backrest Release Trim, Removing And Installing, Super-Sport: Removing
WARNING: This page is about a different variant/trim than selected.
-- Pull the operating lever -1- upward -arrow A-.
-- Push a flat-head screwdriver between the trim and operating lever, as shown in the illustration.
-- Release the right catches -arrow B-.
-- Hold the operating lever pushed -1-, push a flat-head screwdriver between the trim and operating lever, as shown in the illustration.
-- Release the left catches -arrow-.
-- Bring the operating lever -1- back into the resting position.
-- Disengage the trim -2- by hand in the direction of the -arrow-, and if necessary push on the opposite side.