AUDI Radio Can (I7X), Through My 2016
- Connection, AM/FM1/FM2
- 4-Pin Connector -T4al- to the Front Information Display Control Head -J685-
- Connection block with four multi-pin connectors
- Connector 2, AM/FM1 from Antenna Amplifier -R24-, Antenna -R11-
- Connector 1, FM2 from Antenna Amplifier 2 -R111- or Antenna Amplifier 3 -R112-, Radio Antenna 2 -R93-
Unlisted connector terminals are not assigned.
All pins are connected to the Front Information Display Control Head -J685-.
- LVDS (-)
- Not Assigned
- LVDS (+)
- Ground
3 - Connection Block with Four Multi-Pin Connectors
- Right Rear Speaker (+)
- Right Front Speaker (+)
- Left Front Speaker (+)
- Left Rear Speaker (+)
- Right Rear Speaker (-)
- Right Front Speaker (-)
- Left Front Speaker (-)
- Left Rear Speaker (-)
B - Not Assigned
1 - LF-In ground from the External Audio Source Connection -R199-
2 - Right LF-In from the External Audio Source Connection -R199-
7 - Left LF-In from the External Audio Source Connection -R199-
8 - LF-In ground shielding
17 - Terminal 31
18 - Terminal 30
1 - CAN bus high to the Multimedia System Control Head -E380- /Front Information Display Control Head -J685-
2 - Reset Multimedia System Control Head -E380-
6 - CAN bus high, Infotainment
7 - CAN bus low to the Multimedia System Control Head -E380- /Front Information Display Control Head -J685-
8 - Reset (Information Electronics Control Module 1 -J794-) from Multimedia System Control Head -E380-
12 - CAN bus low, Infotainment