Right/Left MULTIFUNCTION Buttons On Steering Wheel -E441- / -E440-, Removing And Installing, 4-Spoke Steering Wheel: Installing
WARNING: This page is about a different variant/trim than selected.
-- Install in reverse order of removal. Note The Following:
-- Place the decorative trim with mounted multifunction buttons onto the steering wheel.
-- Route the connection cable for the tiptronic switch -2- as shown.
-- Route the rest of the connector cables, including plugs, into the guides in the steering wheel.
-- Push the decorative trim -2- with multifunction buttons onto the steering wheel -1- until it engages securely.
-- Finally, check the steering wheel again to make sure the wiring is correct.