LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (COMMUNICATION (2 Of 2) -- (A3 SEDAN)) >> 91 Communication >> MULTIFUNCTION Steering Wheel >> Right And Left MULTIFUNCTION Buttons On Steering Wheel -E441- / -E440-, Removing And Installing >> Right/Left MULTIFUNCTION Buttons On Steering Wheel -E441- / -E440-, Removing And Installing, 3-Spoke Steering Wheel >> Installing

Right/Left MULTIFUNCTION Buttons On Steering Wheel -E441- / -E440-, Removing And Installing, 3-Spoke Steering Wheel: Installing

WARNING: This page is about a different variant/trim than selected.

-- Install in reverse order of removal. Note The Following: 

-- Place the decorative trim with mounted multifunction buttons onto the steering wheel.

-- Make sure that the connection cable for the Tiptronic switches -2- are routed as shown.

Fig 1: Be Careful Of Connectors To Tiptronic Switches
GWWA91-11666Courtesy of AUDI OF AMERICA, LLC

-- Route the rest of the connection cable, including the connectors, into the guides in the steering wheel.

-- Push the decorative trim -2- with multifunction buttons onto the steering wheel -1- until it engages securely.

Fig 2: Locating Trim With Multifunction Buttons
GWWA91-11667Courtesy of AUDI OF AMERICA, LLC

-- Finally, check the steering wheel again to make sure the wiring is correct.