GPS Antenna, Removing And Installing, Convertible: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove The Center Speaker Trim In The Instrument Panel. Refer to OVERVIEW - INSTRUMENT PANEL .
-- Release the catches -2- for the GPS Antenna -R50- -1-.
-- Pull the GPS Antenna -R50- -1- upward out of the instrument panel until the connector is accessible.
-- Release and disconnect the connector from the GPS Antenna -R50- -1-.
-- Remove the GPS Antenna -R50-.