Close Range Communication Antenna, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Remove The Center Speaker Trim In The Instrument Panel. Refer to SPEAKER TRIM, REMOVING AND INSTALLING / OVERVIEW - INSTRUMENT PANEL .

-- Release the catches -2- for the Close Range Communication Antenna -R269- -1-.

Fig 1: Identifying Close Range Communication Antenna -R269-

Courtesy of AUDI OF AMERICA, LLC

-- Tilt the Close Range Communication Antenna -R269- -1- in the direction of -arrow- out of the holder in the instrument panel.

-- Release and disconnect the connector -3- from the Close Range Communication Antenna -R269- -1-.

-- Remove the Close Range Communication Antenna -R269-.