Antenna Amplifier -R24-, Removing And Installing, 3-Door, 5-Door Vehicles: Removing
WARNING: This page is about a different variant/trim than selected.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove The Upper Rear Lid Trim Panel. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -2 and 4- on the Antenna Amplifier -R24- -1-.
-- Only loosen the screw -3- (do not remove) and remove the Antenna Amplifier -R24- -1- from the rear lid.