Installing The Bonded Rubber Bushing
WARNING: This page is about a different variant/trim than selected.
-- Install the :VAS6779/2 -7- in the :VAS6779/7 -1-.
-- Install the :VAS6779 as shown in the illustration on the subframe.
- :VAS6779/7
- :VAS6779/6 , -arrow - marking on the Funnel must be opposite of both bolts -arrow-
- :VAS6779/9
- :VAS6779/8 , the marking -I- on the incremental ring must align with the marking -X- on the :VAS6779/9
- :VAS6178 with :T10205/13
- :VAS6779/3
- :VAS6779/2
-- Press in both bonded rubber busing at the same time.
-- Remove :VAS6779 from the subframe and check seating of the pressed in bonded rubber bushing.
Install in reverse order of removal.