Rear Lower Control Arm Bonded Rubber Bushing: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Press Plate :VW401
- Press Piece - Rod :VW411
- Press Piece - Multiple Use :VW412
- Bearing Installer - Ball Joint/Bushing/Bearing - Sleeve :VW459/2
- Bearing Installer - Wheel Bearing :3345
- Press Plate :VW401
- Press Piece - Rod :VW411
- Bearing Installer - Multiple Use :3348
- Grease :G 052 150 A2 . Refer to the parts information
Pressing Out the Bonded Rubber Bushing:
- Control arm removed. Refer to LOWER CONTROL ARM, REMOVING AND INSTALLING .
-- Press out bonded rubber bushings as depicted in the illustration.
- :VW411
- :3348
- Control Arm
- :3345
- :VW401