Removing The Outer CV Joint
WARNING: This page is about a different variant/trim than selected.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Secure the drive axle with protective covers in a vise clamp.
-- Fold back boot.
-- Align the :T10382
so that the flat side of the :T10382/1
faces the :T10382/2
.
-- Attach the :T10382
to the :VW771
.
-- Remove the CV joint from the drive axle using the :T10382
and :VW771
.
- :T10382/1
- :T10382/2