Triple Roller Joint, Disassembling

Courtesy of AUDI OF AMERICA, LLC

-- Open clamp at shaft and slide back CV boot.

-- Remove the joint from the drive axle.

-- Remove securing ring.

1  - Clamp (commercially available) or :VW161A 

-- Insert drive axle in vise.

-- Press triple roller star off drive axle.

Courtesy of AUDI OF AMERICA, LLC

-- Pull off CV boot from shaft.

-- Clean shaft, joint and groove for oil seal.

ASSEMBLING 

-- Slide small clamp for joint protective boot onto shaft.

-- Slide CV boot onto shaft.

-- Slide joint piece onto shaft.