LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 40 (Rear Suspension -- (A3 Sedan)) >> 42 Rear Suspension >> Stabilizer Bar >> Coupling Rod, Removing And Installing >> Removing

Coupling Rod, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Before beginning work measure the distance from the center of wheel to lower edge of wheelhouse. Refer to WHEEL BEARING IN CURB WEIGHT, LIFTING VEHICLES WITH COIL SPRING .

-- Remove the wheel. Refer to WHEELS AND TIRES .

Vehicles With Stone Chip Protection: 

-- Remove the expanding rivets -1-.

GWWN42-10610Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2- and the stone chip protection -3-.

Continuation For All Vehicles 

-- Remove the nuts -1 and 3- and the bolt -4-.

GWWA42-10662Courtesy of AUDI OF AMERICA, LLC

-- Remove the coupling rod -2- from the stabilizer bar and control arm.