LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 36 (Maintenance, Diagnosis (Intervals) -- (A3 Sedan)) >> 03 Maintenance, Diagnosis >> Old Format Chapters - Blocked Via Metadata >> My 2013 Maintenance Intervals - Old Format >> My 2013 Maintenance Intervals - CANADA >> Service Intervals

Service Intervals

WARNING: This page is about a different variant/trim than selected.

If you are not sure when you should bring your Audi in for service or which services are to be performed on your vehicle, ask your authorized Audi Service Advisor.

  Service intervals in kilometers
  8, 000 km(1)   Standard Maintenance Service with tire rotation
  25, 000 km(2)   Major Maintenance Service with additional items
  40, 000 km   Standard Maintenance Service
  55, 000 km   Major Maintenance Service with additional items
  70, 000 km   Standard Maintenance Service
  85, 000 km   Major Maintenance Service with additional items
  100, 000 km   Standard Maintenance Service
  115, 000 km   Major Maintenance Service with additional items
  130, 000 km   Standard Maintenance Service
  145, 000 km   Major Maintenance Service with additional item
  160, 000 km   Standard Maintenance Service
  175, 000 km   Major Maintenance Service with additional items
  190, 000 km   Standard Maintenance Service
  205, 000 km   Major Maintenance Service with additional items
   
(1) First standard maintenance service at 8, 000 km or 1 year after delivery, whichever occurs first. Standard maintenance services thereafter occur at intervals of 15, 000 km or 1 year after the last standard maintenance service, whichever occurs first.
(2) First major maintenance service at 25, 000 km or 2 years after delivery, whichever occurs first. Major maintenance services thereafter occur at intervals of 30, 000 km or 2 years after the last major maintenance service, whichever occurs first.
The intervals shown in this table are based on vehicles operating under normal conditions. In case of severe conditions, such as extremely low temperatures, excessive dust, etc., it is necessary for certain operations to be carried out in between the given intervals. This applies particularly to engine oil changes and the cleaning or replacing of the air cleaner filter element.