Brake Pads, Removing And Installing, Brakes 1LC/1LJ/1ZA/1ZD/1ZE/1ZP: Removing
WARNING: This page is about a different variant/trim than selected.
NOTE:
Label the brake pads when removing if they are going to be used again. Install in the same position, otherwise the braking effect will be uneven.
-- Remov WHEELS AND TIRES .
-- Remove the bolts -arrows- by counterholding at the guide pins -1 and 2-.
-- Remove the brake caliper.
CAUTION:
There is a risk of damaging the brake hose.
- Do not let the brake caliper hang on the brake hose. Do not support the weight with the brake hose.
- Replace the brake hose if damaged.
There is a risk of damaging the brake caliper piston.
- Do not press the brake pedal when the brake caliper is removed.
-- Hang the brake caliper on the body using a suitable wire.
-- Disconnect the connector -arrow- for the brake pad wear indicator contact from the right brake caliper.
-- Remove the brake pads.