Vacuum, Creating With Hand Vacuum Pump
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Hand Vacuum Pump:VAS6213
In certain situations, the vacuum can be created using a :VAS6213 instead of using the engine or a vacuum pump.
-- To do so, connect the :VAS6213 to the vacuum hose from the connection -B- to the :VAS6721 .
-- Open the shut-off valve -B-.
-- Create the vacuum using the :VAS6213 until a vacuum between 600 and 950 mbar is displayed on the :VAS6721 .
-- Then perform the relevant tests.