Vacuum Sensor -G608-, Removing And Installing: Removing

Vehicles With 4-Cylinder Engine: 

-- Remove the check valve. Refer to CHECK VALVE, REMOVING AND INSTALLING .

Vehicles With 2.5L TFSI Engine 

Fig 1: Loosen Clamps And Remove Air Guide Pipe

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -arrows- and remove the air duct pipe.

Continuation For All Vehicles: 

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers -arrows- and remove the Vacuum Sensor -G608- -item 1- from the check valve.