Bleeding Sequence
WARNING: This page is about a different variant/trim than selected.
1 - Left Front Brake Caliper
2 - Right Front Brake Caliper
3 - Left Rear Brake Caliper
4 - Right Rear Brake Caliper
NOTE:
Bleed the brake caliper at each bleed screw. If the brake caliper has two bleed screws, bleed the outer screw first.
-- Depress the brake pedal forcefully and hold.
-- Open the bleed screw on the brake caliper.
-- Press the brake pedal down until it stops.
-- Close the bleeder screw with the pedal depressed.
-- Release the brake pedal slowly.
-- Repeat the bleeding procedure in the specified sequence for the remaining brake calipers.
NOTE:
This bleeding procedure must be performed five times per brake caliper.
A road test must be performed after bleeding. During this, at least one ABS control must be performed!
WARNING:
Risk of accident!
- Make sure the brakes are working correctly before driving the vehicle for the first time.