Outer Window Shaft Strip, Removing And Installing: Removing

-- Lower the door window.

-- Remove the front door trim panel. Refer to FRONT DOOR TRIM PANELS .

-- Remove the A-pillar trim. Refer to A-PILLAR TRIM, REMOVING AND INSTALLING .

-- Remove the inner window shaft strip. Refer to OVERVIEW - A-/B-PILLAR TRIM .

-- Insert the :T40219  next to the guide -4- for the window shaft strip -3- and hold it on the retaining strip -2-.

Courtesy of AUDI OF AMERICA, LLC

• The front section -1- of the :T40219  must be installed as shown.

-- Push the :T40219  gently in the direction of the -arrow- to release it.

• The retaining strip must audibly release.

-- Remove the window shaft strip upward from the door flange using the :T40219  .

-- Remove the window shaft strip.