Washer Fluid Reservoir Filler Tube, Removing And Installing, AUDI A3/S3 With Side Auxiliary Cooler: Removing

-- If there is washer fluid in the filler neck, drain it by removing the right front wheel housing liner. Refer to WHEEL HOUSING LINER .

-- Place a drip tray under the windshield washer fluid reservoir.

-- Release the locking clamps -5 and 6- -arrows- and remove the water hose from the windshield washer pump.

Courtesy of AUDI OF AMERICA, LLC

-- Press the release button and remove the water hose -2- from the headlamp washer pump.

-- Remove the bolt -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the filler neck -2- upward from the mount and the windshield washer fluid reservoir -arrow-.