Spray Nozzle, Adjusting
WARNING: This page is about a different variant/trim than selected.
-- Adjust the rear window washer system spray nozzles. Refer to appropriate service information. .
-- If the spray field does not correspond to the specifications, clean dirty spray jet.
Cleaning the Nozzle
CAUTION:
Danger of damage.
- Do not use any objects to clean the spray nozzles!
-- Remove the spray nozzle. Refer to SPRAY NOZZLES, REMOVING AND INSTALLING .
-- Rinse the spray nozzle with clean water opposite the spray direction.
-- To remove any remaining impurities, the nozzle must only be blown out opposite to spray direction using compressed air.
-- If the spray field still does not correspond to the specifications, replace the spray nozzle.