Overview - Headlamp Washer System, AUDI A3/S3 With Side Auxiliary Cooler

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Headlamp Washer System, Audi A3/S3 With Side Auxiliary Cooler

Courtesy of AUDI OF AMERICA, LLC

Washer Fluid Hose
- From the Headlamp Washer Pump -V11-
Washer Fluid Hose
- For the right spray nozzle
Bolt
- 0.9 Nm
- Quantity: 2
Right Spray Nozzle
- Removing and installing. Refer to SPRAY NOZZLES, REMOVING AND INSTALLING, WITH SIDE AUXILIARY COOLER .
Grommet
- Replace if damaged.
Connection
- For washer fluid hose
- To replace, warm and remove the washer fluid hose
Headlamp Washer Pump -V11-
- Removing and installing. Refer to Headlamp Washer Pump -V11-, REMOVING AND INSTALLING, AUDI A3/S3 WITH SIDE AUXILIARY COOLER .
Windshield Washer Fluid Reservoir
- Removing and installing. Refer to WASHER FLUID RESERVOIR, REMOVING AND INSTALLING, AUDI A3/S3 WITH SIDE AUXILIARY COOLER .
Left Spray Nozzle
- Removing and installing. Refer to SPRAY NOZZLES, REMOVING AND INSTALLING, WITH SIDE AUXILIARY COOLER .
Bolt
- 0.9 Nm
- Quantity: 2
Washer Fluid Hose
- For the left spray nozzle
T-Connection
- For washer fluid hose
- To replace, warm and remove the washer fluid hose