LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (Hood, Lids -- (A3 Sedan)) >> 55 Hood, Lids >> Hood >> Release Cable, Removing And Installing >> Release Cable Coupling, Removing And Installing

Release Cable Coupling, Removing And Installing

WARNING: This page is about a different variant/trim than selected.
GWWA55-10893Courtesy of AUDI OF AMERICA, LLC

-- Remove the clip -2-.

-- Release the tabs -arrow- from the front on the lock carrier -3- and remove the coupling -1- from behind.

-- When installing the catches must audibly engage in the lock carrier.

scientia non olet · About LEMON Manuals